Torna al blog
Guide pratiche 2026-11-21 Klum House: Bag making kits, bag sewing patterns, waxed 0 visualizzazioni

How to Sew the Naito Black Leather + Hardware Kit

How to Sew the Naito Black Leather + Hardware Kit

Learn how to assemble the Naito Black Leather + Hardware Kit into a convertible bucket bag with pockets and a cinch closure. Step-by-step guidance for bag makers.

What You Get in the Naito Black Leather + Hardware Kit

The Naito Black Leather + Hardware Kit includes all the leather and hardware you need to sew a pocket-filled bucket bag that converts from a tote to a crossbody sling. The kit features a cylindrical body with a sturdy, sit-flat base, 360 degrees of interior and exterior pockets, a magnetic snap rivet, extra-strength tubular rivets, and a clever closure that cinches into elegant pleats with the pull of a strap.

You have the option to add the pattern, online class, and tools separately. The hardware finish is available in Brass, Antique Brass, or Black, letting you customize the look.

Naito Black Leather + Hardware Kit at a Glance

  • Naito - Black Leather + Hardware Kit: The Naito is a pocket-filled bucket bag that converts from tote to crossbody sling. This convertible design gives you two carry options from a single bag, making it versatile for daily use or travel.
    Naito - Black Leather + Hardware Kit
    Naito - Black Leather + Hardware Kit
  • Naito - Black Leather + Hardware Kit: It features a cylindrical body with a sturdy, sit-flat base, 360 degrees of interior and exterior pockets. The sit-flat base keeps the bag stable when set down, and the full circle of pockets maximizes storage for small items.
  • Naito - Black Leather + Hardware Kit: The closure cinches into elegant pleats with the pull of a strap. This simple mechanism creates a finished look while securing the contents, and it's easy to operate even one-handed.
  • Naito - Black Leather + Hardware Kit: This kit includes all of the leather + hardware needed to make this bag. You don't need to source materials separately; the kit provides everything except the pattern, class, and tools.

Step-by-Step Assembly Guide

Before you begin, gather the Naito Black Leather + Hardware Kit, the pattern (purchased separately), and basic leather sewing tools such as a sewing machine capable of handling leather, a leather needle, thread, and a rivet setter.

The following steps outline the general assembly process. Always refer to your specific pattern instructions for exact measurements and sequence.

  1. Prepare the leather pieces: Lay out all leather components from the kit. Check that you have the cylindrical body panels, base, strap pieces, and pocket pieces. Trim any rough edges if needed, but avoid cutting into stitching lines.
  2. Attach the pockets: Using the pattern as a guide, sew the interior and exterior pockets onto the body panels. The kit's 360-degree pocket layout means pockets go all around the bag, so take care to space them evenly.
  3. Install the magnetic snap rivet: Follow the pattern to mark the snap position on the closure flap or body. Use the supplied magnetic snap rivet and extra-strength tubular rivets to secure it. A rivet setter tool (not included) will be needed for this step.
  4. Assemble the cylindrical body: Sew the side seam of the body panel to form a cylinder. Attach the sit-flat base, ensuring the seam allowances are aligned and the base sits evenly.
  5. Create the cinch closure: Insert the strap through the designated channels or hardware as shown in the pattern. When you pull the strap, the top edge should gather into pleats. Test the closure before final stitching.
  6. Attach the convertible strap: Sew or rivet the strap hardware to the bag. The strap can be worn as a tote handle or clipped to the side for crossbody use, depending on your pattern instructions.
  7. Final inspection: Check all seams for strength, ensure rivets are flush, and test the magnetic snap and cinch closure. Trim any loose threads.

Choosing Your Hardware Finish

The Naito Black Leather + Hardware Kit is available with three hardware finishes: Brass, Antique Brass, or Black. Brass gives a classic, warm contrast against black leather. Antique Brass offers a slightly muted, vintage look. Black hardware creates a sleek, monochromatic appearance. Your choice affects the overall style but not the assembly process.

What the Kit Does Not Include

The Naito Black Leather + Hardware Kit contains only the leather and hardware. You will need to purchase the pattern and online class separately if you want guided instruction. Basic sewing tools (sewing machine, leather needle, thread, rivet setter, cutting mat, rotary cutter) are also required. The catalog does not confirm specific thread type or needle size recommendations, so consult your machine manual or the pattern for guidance.

Articoli correlati

Customer Service
Home
Prodotti
Carrello
Profilo