How to Use Merino Wool Felt Strap Pads on Bags

Quick answer

Attach Merino Wool Felt Strap Pads to your bag straps using the included leather glue and hardware for a softer, more comfortable carry.

Step-by-step installation

1. Prepare the strap surface: Clean the strap area where the pad will sit. Remove any dust or oils with a dry cloth. If the strap is new, flex it a few times to soften the leather. A clean, slightly flexible surface helps the glue bond better.
2. Apply leather glue to the pad: Apply a thin, even layer of the included leather glue to the back of the felt pad. Avoid over-applying, as excess glue can seep out when pressed. Too much glue can create a mess and weaken the bond.
3. Position and press the pad: Place the pad onto the strap in your desired position. Press firmly from the center outward to remove air bubbles. Hold for 30 seconds. Work quickly—the glue sets fast. Repositioning after pressing is difficult.
4. Attach the hardware (if using): If your kit includes metal hardware (e.g., rivets or snaps), follow the included instructions to secure them through the pad and strap. Use a punch if needed. Hardware adds durability but is optional for light-use bags.
5. Let the glue cure fully: Allow the glue to cure for at least 24 hours before using the bag. Avoid flexing or wetting the strap during this time. Rushing the cure can cause the pad to peel off later.

Product used in this guide

• Merino Wool Felt Strap Pads: Merino wool felt provides a soft, natural padding layer for your straps. This padding makes carrying a loaded bag more comfortable, especially on long walks or commutes.